Tutorials: Tek Gel Profiler

› Surface Gel Tel Product Catalog (PDF)

DIRECTIONS FOR USE / APPLICATION:

• Ready for job-site mixing.
• Excellent for use with Flattoos™.
• If using water based or dry powder colorants, surface requires profiling first using Tek Gel™ for Profiling or HD24.
• If decorative Flattooing™ is desired, use Tek Gel™ for Stenciling.
• In separate container, mix 1/2 part Stain Mule™ to 1 part colorant. (1/2:1)
• Stir or shake colored Stain Mule™ well before applying to horizontal/vertical concrete surfaces.
• Allow mixture to remain on surface in compliance with colorant manufacturer's recommendation.
• Neutralize and/or clean surface in compliance with colorant manufacturer's recommendation. Stain Mule™ is water-soluble.
• If deeper color intensity is desired, repeat above steps.

Read MSDS prior to use.

PRIMARY USE:

• Designed for job-site color mixing for precision color placement control to horizontal, vertical & inverted concrete surfaces.
• When using water based or dry powder colorants, surface requires profiling using TEK GEL™ for Profiling or HD24 prior to application of colored Stain Mule™.
• When decorative stenciling is desired, use TEK GEL™ for Stenciling.

LIMITATIONS/INCOMPATIBILITIES:

• Darker colorants yield best results.
• Lighter colorants may require additional applications to achieve desired color intensity.
• When mixing dry powder colorants, once Stain Mule™ and colorant has dried on the surface, sweep or vacuum surface thoroughly before sealing.
• Avoid continuous direct sunlight
• Avoid freezing
• Follow all applicable State, Federal and Local chemical disposal regulations.

› Return to Tutorials Menu